Polaris 1000

Polaris 1000 kWh Sub Meter
  1. Single phase digital kWh sub meter, Revenue-grade accuracy
  2. UL/cUL Listed, California CTEP Approved
  3. Non-volatile Memory, the stored data is maintained through power outages
  4. CTs are not direction sensitive. It does not matter if the contractors install the CT with wrong direction of current. DAE meters can detect it and compensate it
  5. Foolproof system. DAE meter will be warning if the CTs are installed in the wrong phases
  6. DAE’s CT is exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 kWh meters and SMB350 multi-circuit, multi-function meters
  7. Very compact current sensors (CTs) and the accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.
  8. Parallel up to three sets of CTs for cumulative reading
  9. kWh reading with LED display, very clear even in not-well lighted area
Order From DAE

pdf download Polaris 1000 datasheet

pdf download Polaris 1000 User's Manual

Polaris 1500

Polaris 1500 kWh Sub Meter
  1. Single phase digital kWh sub meter, Revenue-grade accuracy
  2. With Modbus/RTU over RS485 communication
  3. UL/cUL Listed, California CTEP Approved
  4. Compatible with DAE EnergyLink400 for remote reading with billing
  5. Non-volatile Memory, the stored data is maintained through power outages
  6. CTs are not direction sensitive. It does not matter if the contractors install the CT with wrong direction of current. DAE meters can detect it and compensate it.
  7. Foolproof system. DAE meter will be warning if the CTs are installed in the wrong phases.
  8. DAE’s CT is exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 kWh meters and SMB350 multi-circuit, multi-function meters.
  9. Very compact current sensors (CTs) and the accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.
  10. Parallel up to three sets of CTs for cumulative reading
  11. kWh reading with LED display, very clear even in not-well lighted area
Order From DAE

pdf download Polaris 1500 datasheet

pdf download Polaris 1500 User's Manual

Polaris 2000

Polaris 2000 kWh Sub Meter
  1. Three phase digital kWh sub meter, Revenue-grade accuracy
  2. UL/cUL Listed, California CTEP Approved
  3. Non-volatile Memory, the stored data is maintained through power outages
  4. CTs are not direction sensitive. It does not matter if the contractors install the CT with wrong direction of current. DAE meters can detect it and compensate it.
  5. Foolproof system. DAE meter will be warning if the CTs are installed in the wrong phases.
  6. DAE’s CT is exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 kWh meters and SMB350 multi-circuit, multi-function meters.
  7. 5A CT is available to measure the current of original CT in electrical panel. This will significantly reduce cost for customers
  8. Very compact current sensors (CTs) and the accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.
  9. Parallel up to three sets of CTs for cumulative reading
  10. kWh reading with LED display, very clear even in not-well lighted area
  11. Demand optional (15 minute interval standard, 30 minute or 60 minute intervals available)
Order From DAE

pdf download Polaris 2000 datasheet

pdf download Polaris 2000 User's Manual

Polaris 2500

Polaris 2500 kWh Sub Meter
  1. Three phase digital kWh sub meter, Revenue-grade accuracy
  2. With Modbus/RTU over RS485 communication
  3. UL/cUL Listed, California CTEP Approved
  4. Compatible with DAE EnergyLink400 for remote reading with billing
  5. Non-volatile Memory, the stored data is maintained through power outages
  6. CTs are not direction sensitive. It does not matter if the contractors install the CT with wrong direction of current. DAE meters can detect it and compensate it.
  7. Foolproof system. DAE meter will be warning if the CTs are installed in the wrong phases.
  8. DAE’s CT is exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 kWh meters and SMB350 multi-circuit, multi-function meters.
  9. 5A CT is available to measure the current of original CT in electrical panel. This will significantly reduce cost for customers
  10. Very compact current sensors (CTs) and the accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.
  11. Parallel up to three sets of CTs for cumulative reading
  12. kWh reading with LED display, very clear even in not-well lighted area
  13. Demand optional (15 minute interval standard, 30 minute or 60 minute intervals available)
Order From DAE

pdf download Polaris 2500 datasheet

pdf download Polaris 2500 User's Manual

Polaris 3000

Polaris 3000 kWh Sub Meter
  1. Multi-function with display of kWh, kW, voltage, current, kVArh, PF, demand
  2. Three phase digital kWh sub meter, Revenue-grade accuracy
  3. With Modbus/RTU over RS485 communication
  4. UL/cUL Listed, California CTEP Approved
  5. Compatible with DAE EnergyLink400 for remote reading with billing
  6. Non-volatile Memory, the stored data is maintained through power outages
  7. CTs are not direction sensitive. It does not matter if the contractors install the CT with wrong direction of current. DAE meters can detect it and compensate it.
  8. Foolproof system. DAE meter will be warning if the CTs are installed in the wrong phases.
  9. DAE’s CT is exactly the same and exchangeable among all the meters including Polaris 1000, 1500, 2000, 2500, 3000 kWh meters and SMB350 multi-circuit, multi-function meters.
  10. 5A CT is available to measure the current of original CT in electrical panel. This will significantly reduce cost for customers
  11. Very compact current sensors (CTs) and the accuracy will not be affected when the CTs are mounted up to 2000 feet away from the meter.
  12. Parallel up to three sets of CTs for cumulative reading
  13. Parameters reading with LED display, very clear even in not-well lighted area
  14. Demand standard (15 minute interval standard, 30 minute or 60 minute intervals available)
Order From DAE

pdf download Polaris 3000 datasheet

pdf download Polaris 3000 User's Manual

Multiple Meter Unit

Multiple Meter Unit kWh Sub Meter
  1. For energy monitoring and billing of up to 8 tenants
  2. Three times smaller than competitor's MMU8 in size
  3. Can be easily connected to PCs, mobile phones and iPads for remote monitoring

pdf download Multiple Meter Unit datasheet

DEM720

DEM720 kWh Sub Meter
  1. Single Phase Two Wire kWh Meters
  2. Pass Through type
  3. 6-digit LCD display
  4. Displays kWh
Order From DAE

pdf download DEM720 datasheet

pdf download DEM720 installation guide
pdf download DEM720P installation guide (with RS485 communication)

DEM730